Andersen casement windows are a popular choice for homeowners due to their sleek design and energy efficiency. However, accidents happen, and if you find yourself with a shattered or cracked window pane, it can be a daunting task to replace it. In this guide, we’ll walk you through the steps to replace glass in an Andersen casement window, so you can get your windows looking and functioning like new again. So, let’s get started!
If you have an Andersen casement window with a broken or cracked glass, you can replace it with a new one by following these simple steps. Replacing the glass of your window is a cost-effective solution that can extend the life of your window and give it a new look.
Step 1: Identify the Type of Glass
The first step in replacing the glass of your Andersen casement window is to identify the type of glass you need. Andersen windows use different types of glass, such as tempered glass, annealed glass, and laminated glass. You can find the type of glass on the label of the glass or by contacting Andersen customer service.
Once you have identified the type of glass, you can order a new one from Andersen or a local glass supplier. Make sure to order the correct size and type of glass for your window.
Step 2: Remove the Sash
The next step is to remove the sash from the window frame. Open the window fully and locate the hinge arms on the sides of the sash. Use a screwdriver to remove the screws that attach the hinge arms to the window frame.
Gently pull the sash away from the frame and place it on a flat surface, such as a table or a workbench. Make sure to protect the sash with a towel or a blanket to prevent any damage.
Step 3: Remove the Old Glass
Now that the sash is removed, you can remove the old glass. Use a putty knife or a glazier’s tool to remove the old putty and glazing points that hold the glass in place.
Once the putty and glazing points are removed, carefully lift the glass out of the sash and set it aside. Be careful not to break the glass or damage the sash.
Step 4: Install the New Glass
Place the new glass into the sash and make sure it fits snugly. Use glazing points to hold the glass in place and apply putty around the edges of the glass to seal it.
Smooth out the putty with a putty knife or a glazier’s tool and make sure there are no gaps or bubbles. Let the putty dry for at least 24 hours before moving on to the next step.
Step 5: Reinstall the Sash
Once the putty is dry, you can reinstall the sash. Place the sash back into the window frame and attach the hinge arms with screws.
Test the window by opening and closing it to make sure it works properly. If the window is not closing properly, adjust the hinge arms until it fits snugly.
Step 6: Clean the Glass
After the window is installed, clean the new glass with a glass cleaner and a lint-free cloth. Make sure to remove any fingerprints or smudges from the glass.
Benefits of Replacing Glass in Andersen Casement Window
Replacing the glass in your Andersen casement window has numerous benefits. It can improve the energy efficiency of your window, reduce noise, and enhance the appearance of your home.
By replacing the glass, you can extend the life of your window and avoid the cost of replacing the entire window. It is also a simple DIY project that can be done in a few hours with the right tools and materials.
Conclusion
Replacing the glass in your Andersen casement window is a simple and cost-effective solution that can give your window a new look and improve its performance. Follow these steps to replace the glass of your window and enjoy the benefits of a new, clear glass.
Frequently Asked Questions
Here are some common questions about replacing glass in Andersen casement windows:
What tools do I need to replace glass in an Andersen casement window?
Replacing the glass in an Andersen casement window requires a few basic tools:
- Gloves and safety glasses
- Putty knife
- Glazing compound
- Glazing points (small metal triangles)
- Glass cutter or pre-cut glass
- Glass cleaner
Before you begin, make sure you have all the necessary tools on hand.
How do I remove the broken glass from an Andersen casement window?
The first step in replacing glass in an Andersen casement window is to remove the broken glass. To do this:
- Put on gloves and safety glasses to protect your hands and eyes.
- Use a putty knife to gently pry off the wooden stops that hold the glass in place.
- Remove the broken glass and any remaining pieces of glazing compound or glazing points.
- Clean the window frame and remove any debris or dust.
Once you’ve removed the broken glass, you can begin the process of installing the new glass.
How do I measure the glass for an Andersen casement window?
Before you can order or cut a replacement piece of glass for your Andersen casement window, you need to measure the size of the opening. To do this:
- Measure the width and height of the opening from edge to edge.
- Subtract 1/8 inch from the width and height to allow for a small gap around the glass.
- Take these measurements to a glass supplier or use them to order a pre-cut piece of glass.
Be sure to double-check your measurements before ordering or cutting the glass to ensure a proper fit.
How do I install the new glass in an Andersen casement window?
Once you have your replacement glass and all the necessary tools, you can begin the process of installing the new glass. To do this:
- Apply a thin layer of glazing compound around the edges of the window frame.
- Insert the new glass into the opening, pressing it firmly against the glazing compound.
- Use glazing points to secure the glass in place, spacing them evenly around the edges.
- Apply a final layer of glazing compound over the top of the glazing points to seal them in place.
- Allow the glazing compound to dry completely before replacing the wooden stops.
With the new glass installed and sealed, your Andersen casement window should be as good as new.
Do I need to hire a professional to replace the glass in my Andersen casement window?
While replacing the glass in an Andersen casement window is a relatively simple process, it does require some basic DIY skills and the right tools. If you’re not comfortable working with glass or don’t have the necessary tools on hand, it may be best to hire a professional to do the job for you.
A professional window repair or glass company can provide expert service and ensure that the replacement glass is properly installed and sealed.
In conclusion, replacing the glass in your Andersen casement window is a task that can be accomplished with the right tools and a bit of patience. It’s important to take the necessary safety precautions and to carefully remove the window sash before attempting to replace the glass.
By following the step-by-step guide outlined in this article, you can confidently replace the broken or damaged glass in your Andersen casement window without having to hire a professional. Not only will this save you time and money, but it will also give you the satisfaction of completing a DIY project.
Remember, if you encounter any difficulties or feel uncomfortable with the process, it’s always best to seek the help of a professional. With the right tools and knowledge, however, replacing the glass in your Andersen casement window can be a rewarding and fulfilling experience.
