Are you looking for a cost-effective way to insulate your home during the winter months? One easy solution is to put plastic on your windows with blinds. This simple DIY project can help reduce heat loss and save you money on your energy bills.
In this guide, we will walk you through the steps to effectively put plastic on your windows with blinds. From gathering materials to properly sealing the edges, we will provide you with all the information you need to successfully complete this project. So, let’s get started and make your home cozy and energy-efficient!
- Measure your windows: Measure the width and height of your windows to determine the amount of plastic you’ll need.
- Clean your windows: Wipe down the windows with a clean cloth to remove dust and dirt.
- Apply double-sided tape: Apply double-sided tape to the window frame.
- Cut the plastic: Cut the plastic to the size of the window, leaving an extra inch on each side.
- Attach the plastic: Attach the plastic to the tape, smoothing out any wrinkles or bubbles.
- Trim the excess: Trim the excess plastic with scissors or a knife.
Putting Plastic on Windows With Blinds
Are you looking for a cost-effective way to keep your home warm during the winter months? One solution is to put plastic on windows with blinds. This helps to insulate your home and keep the cold air out. Here are some steps to follow to get the job done.
Step 1: Measure Your Windows
Before you start, measure the size of your windows. You will need to purchase plastic film that is slightly larger than the size of your window. This will ensure that the plastic covers the entire window and provides maximum insulation.
Step 2: Gather Your Supplies
You will need a few supplies to get started. These include plastic film, double-sided tape, a hair dryer, and a pair of scissors. You can purchase plastic film and double-sided tape at any home improvement store.
Step 3: Clean Your Windows
Clean your windows thoroughly before applying the plastic film. This will ensure that the film adheres properly and provides maximum insulation. Use a window cleaner and a clean cloth to wipe down the windows.
Step 4: Apply Double-Sided Tape
Apply double-sided tape around the edges of the window frame. This will provide a secure seal for the plastic film.
Step 5: Cut the Plastic Film
Cut the plastic film to the size of your window, leaving a few inches of overlap on all sides.
Step 6: Apply the Plastic Film
Carefully apply the plastic film to the window, starting at the top and working your way down. Smooth out any wrinkles or bubbles as you go.
Step 7: Use a Hair Dryer
Use a hair dryer to heat up the plastic film. This will cause it to shrink and create a tighter seal around the window frame.
Step 8: Trim Excess Plastic
Trim any excess plastic using a pair of scissors. Be careful not to cut the double-sided tape.
Step 9: Install Your Blinds
Once the plastic film is in place, you can install your blinds as you normally would. The plastic film will not interfere with the operation of your blinds.
Step 10: Enjoy the Benefits
By putting plastic on windows with blinds, you can enjoy a warmer, more energy-efficient home during the winter months. The plastic film will help to insulate your home and keep the cold air out. Plus, it is an affordable and easy DIY project that anyone can do.
Benefits of Putting Plastic on Windows With Blinds
There are several benefits to putting plastic on windows with blinds. First and foremost, it helps to insulate your home and keep the cold air out. This can lead to lower energy bills and a more comfortable living space.
In addition, putting plastic on windows is a cost-effective way to improve your home’s energy efficiency. It is much cheaper than replacing your windows, and it can be done in just a few hours.
Finally, putting plastic on windows is an easy DIY project that anyone can do. You don’t need any special skills or tools, and the supplies are readily available at any home improvement store.
Plastic on Windows With Blinds Vs Other Insulation Methods
There are several other insulation methods you can use to keep your home warm during the winter months. These include:
– Installing storm windows
– Adding weatherstripping
– Using draft stoppers
While these methods can be effective, they are often more expensive and time-consuming than putting plastic on windows. Plus, they may require professional installation, which can drive up the cost even more.
Overall, putting plastic on windows with blinds is a cost-effective and easy way to improve your home’s energy efficiency. It is a DIY project that anyone can do, and it can lead to significant energy savings over time.
Frequently Asked Questions
Here are some common questions and answers about putting plastic on windows with blinds:
1. Why should I put plastic on my windows with blinds?
Putting plastic on your windows with blinds can help insulate your home and reduce energy costs. It can also help keep out drafts, noise, and dust. Plus, it can provide an extra layer of privacy if your blinds aren’t completely opaque.
To put plastic on your windows with blinds, you’ll need to measure your windows carefully, cut the plastic to size, and then attach it to the window frame using double-sided tape or a window insulation kit. It’s important to make sure the plastic is tight and wrinkle-free for maximum effectiveness.
2. Can I put plastic over my blinds?
Yes, you can put plastic over your blinds. However, it’s important to make sure the plastic doesn’t interfere with the operation of the blinds. If you have horizontal blinds, you may need to remove them temporarily to install the plastic, or you may need to cut the plastic to fit around the blinds. If you have vertical blinds, you can usually install the plastic without removing the blinds.
It’s also important to make sure the plastic doesn’t interfere with the cords or wands that control the blinds. You may need to attach the plastic to the window frame rather than the blinds themselves to avoid this issue.
3. What type of plastic should I use?
There are several types of plastic you can use to cover your windows with blinds. Some popular options include shrink film, self-adhesive film, and heavy-duty clear vinyl. Shrink film is a popular choice because it’s affordable, easy to install, and can create a tight seal. Self-adhesive film is another popular choice because it’s easy to install and can be removed without leaving residue. Heavy-duty clear vinyl is a good choice if you need extra durability or protection.
When choosing a plastic, make sure it’s compatible with your window type (e.g. double-hung, casement, etc.) and that it’s thick enough to provide adequate insulation.
4. Will putting plastic on my windows with blinds damage the blinds?
Putting plastic on your windows with blinds should not damage the blinds, as long as you install the plastic carefully and avoid interfering with the cords or wands that control the blinds. However, if you have delicate or expensive blinds, you may want to consult the manufacturer or a professional before installing plastic to ensure you don’t inadvertently damage them.
If you’re concerned about damaging your blinds, you may want to consider using a window insulation kit that attaches to the window frame rather than the blinds themselves.
5. How long does plastic on windows with blinds last?
The lifespan of plastic on windows with blinds can vary depending on the quality of the plastic, how well it’s installed, and other factors such as exposure to sunlight or extreme temperatures. However, most plastic should last at least one season (i.e. winter) and may last up to several years if installed properly and cared for appropriately.
To extend the life of your plastic, make sure it’s installed tightly and wrinkle-free, and avoid touching or puncturing it unnecessarily. If you notice any damage or wear and tear, you may need to replace the plastic to maintain its effectiveness.
How To Put Plastic On Your Windows – with Window Sills – HOW TO DO?
In conclusion, putting plastic on windows with blinds is an effective way to improve the insulation of your home and save money on energy bills. By following these simple steps, you can easily apply plastic film to your windows and still enjoy the benefits of your blinds.
First, make sure to clean your windows thoroughly before applying the plastic film. This will ensure a smooth and even surface for the film to adhere to. Then, measure and cut the plastic film to fit your window, leaving a small overlap on all sides.
Next, use a hairdryer to warm the film and stretch it taut against the window. This will help remove any wrinkles or air bubbles and create a tight seal. Finally, trim any excess film and reattach your blinds as desired.
By following these steps, you can enjoy a more comfortable and energy-efficient home this winter. Don’t hesitate to try this simple DIY project and see the difference it can make in your home!
